414 lines
19 KiB
Bash
414 lines
19 KiB
Bash
#!/bin/bash
|
|
# By Brielle Bruns <bruns@2mbit.com>
|
|
# URL: http://www.sosdg.org/freestuff/firewall
|
|
# License: GPLv3
|
|
#
|
|
# Copyright (C) 2009 - 2014 Brielle Bruns
|
|
# Copyright (C) 2009 - 2014 The Summit Open Source Development Group
|
|
#
|
|
# This program is free software: you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation, either version 3 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
|
|
# iptables_rules_flush (ipv6|ipv4)
|
|
# Clear all rules from iptables - be very careful in how this is called as it
|
|
# could easily lock out the user from the network. Best way to be safe, is to
|
|
# call iptables_policy_reset first then this function.
|
|
function iptables_rules_flush {
|
|
IP_VERSION=$1
|
|
case $IP_VERSION in
|
|
ipv6) VER_IPTABLES=${IP6TABLES} ; TABLE_NAMES=/proc/net/ip6_tables_names ;;
|
|
ipv4|*) VER_IPTABLES=${IPTABLES} ; TABLE_NAMES=/proc/net/ip_tables_names ;;
|
|
esac
|
|
${display} GREEN "Flushing ${IP_VERSION} rules..."
|
|
${VER_IPTABLES} -F &>/dev/null
|
|
${VER_IPTABLES} -X &>/dev/null
|
|
${VER_IPTABLES} -F INPUT &>/dev/null
|
|
${VER_IPTABLES} -F OUTPUT &>/dev/null
|
|
${VER_IPTABLES} -F FORWARD &>/dev/null
|
|
${VER_IPTABLES} -t nat -F &>/dev/null
|
|
${VER_IPTABLES} -t nat -X &>/dev/null
|
|
${VER_IPTABLES} -t mangle -F &>/dev/null
|
|
${VER_IPTABLES} -t mangle -X &>/dev/null
|
|
${VER_IPTABLES} -P INPUT ACCEPT &>/dev/null
|
|
${VER_IPTABLES} -P OUTPUT ACCEPT &>/dev/null
|
|
${VER_IPTABLES} -P FORWARD ACCEPT &>/dev/null
|
|
#for i in `cat $TABLE_NAMES`; do
|
|
# ${VER_IPTABLES} -F -t $i &>/dev/null
|
|
#done
|
|
#${VER_IPTABLES} -X
|
|
}
|
|
|
|
# iptables_policy_set (ipv6|ipv4) (ACCEPT|DROP)
|
|
# Sets all policy rules to either ACCEPT or DROP for ipv4 or ipv6
|
|
# If no policy given, assume ACCEPT
|
|
function iptables_policy_reset {
|
|
IP_VERSION=$1
|
|
SET_POLICY=${2=ACCEPT}
|
|
case $IP_VERSION in
|
|
ipv6) VER_IPTABLES=${IP6TABLES} ;;
|
|
ipv4|*) VER_IPTABLES=${IPTABLES} ;;
|
|
esac
|
|
${display_c} RED "Setting ${IP_VERSION} policies to ${SET_POLICY}..."
|
|
${VER_IPTABLES} --policy INPUT ${SET_POLICY}
|
|
${VER_IPTABLES} --policy OUTPUT ${SET_POLICY}
|
|
${VER_IPTABLES} --policy FORWARD ${SET_POLICY}
|
|
}
|
|
|
|
# setup_iptables_chains (ipv4|ipv6)
|
|
# Creates the default chains when called
|
|
function setup_iptables_chains {
|
|
IP_VERSION=$1
|
|
case $IP_VERSION in
|
|
ipv6) VER_IPTABLES=${IP6TABLES};
|
|
IPVER="6" ;;
|
|
ipv4|*) VER_IPTABLES=${IPTABLES}
|
|
IPVER="4" ;;
|
|
esac
|
|
# Create the actual chains
|
|
${display} GREEN "Setting up chains for ${IP_VERSION}..."
|
|
${VER_IPTABLES} -N ${InPreRules}
|
|
${VER_IPTABLES} -N ${OutPreRules}
|
|
${VER_IPTABLES} -N ${InEasyBlock}
|
|
${VER_IPTABLES} -N ${OutEasyBlock}
|
|
${VER_IPTABLES} -N ${InFilter}
|
|
${VER_IPTABLES} -N ${OutFilter}
|
|
${VER_IPTABLES} -N ${FwdFilter}
|
|
${VER_IPTABLES} -N ${NAT} -t nat
|
|
${VER_IPTABLES} -N ${PortForward} -t nat
|
|
${VER_IPTABLES} -N ${InPostRules}
|
|
${VER_IPTABLES} -N ${OutPostRules}
|
|
|
|
# Set up rules - the order matters - we do it separately here
|
|
# for easy viewing of order
|
|
if [ -x ${FWCONFIGDIR}/ipv${IPVER}/custom/prerun.sh ]; then . ${FWCONFIGDIR}/ipv${IPVER}/custom/prerun.sh; fi
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Setting up InPreRules"
|
|
${VER_IPTABLES} -A INPUT -j ${InPreRules}
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Setting up OutPreRules"
|
|
${VER_IPTABLES} -A OUTPUT -j ${OutPreRules}
|
|
if [ -x ${FWCONFIGDIR}/ipv${IPVER}/custom/easyblock.sh ]; then . ${FWCONFIGDIR}/ipv${IPVER}/custom/easyblock.sh; fi
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Setting up InEasyBlock"
|
|
${VER_IPTABLES} -A INPUT -j ${InEasyBlock}
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Setting up OutEasyBlock"
|
|
${VER_IPTABLES} -A OUTPUT -j ${OutEasyBlock}
|
|
if [ -x ${FWCONFIGDIR}/ipv${IPVER}/custom/filter.sh ]; then . ${FWCONFIGDIR}/ipv${IPVER}/custom/filter.sh; fi
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Setting up InFilter"
|
|
${VER_IPTABLES} -A INPUT -j ${InFilter}
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Setting up OutFilter"
|
|
${VER_IPTABLES} -A OUTPUT -j ${OutFilter}
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Setting up FwdFilter"
|
|
${VER_IPTABLES} -A FORWARD -j ${FwdFilter}
|
|
if [ -x ${FWCONFIGDIR}/ipv${IPVER}/custom/nat.sh ]; then . ${FWCONFIGDIR}/ipv${IPVER}/custom/nat.sh; fi
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Setting up NAT"
|
|
${VER_IPTABLES} -A POSTROUTING -t nat -j ${NAT}
|
|
if [ -x ${FWCONFIGDIR}/ipv${IPVER}/custom/portfw.sh ]; then . ${FWCONFIGDIR}/ipv${IPVER}/custom/portfw.sh; fi
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Setting up PortForward"
|
|
${VER_IPTABLES} -A PREROUTING -t nat -j ${PortForward}
|
|
if [ -x ${FWCONFIGDIR}/ipv${IPVER}/custom/postrun.sh ]; then . ${FWCONFIGDIR}/ipv${IPVER}/custom/postrun.sh; fi
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Setting up InPostRules"
|
|
${VER_IPTABLES} -A INPUT -j ${InPostRules}
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Setting up OutPostRules"
|
|
${VER_IPTABLES} -A OUTPUT -j ${OutPostRules}
|
|
}
|
|
|
|
function allow_all_loopback {
|
|
IP_VERSION=$1
|
|
case $IP_VERSION in
|
|
ipv6) VER_IPTABLES=${IP6TABLES};
|
|
IPVER="6" ;;
|
|
ipv4|*) VER_IPTABLES=${IPTABLES}
|
|
IPVER="4" ;;
|
|
esac
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} loaded"
|
|
${VER_IPTABLES} -A ${InPreRules} -i lo -j ACCEPT
|
|
${VER_IPTABLES} -A ${OutPreRules} -o lo -j ACCEPT
|
|
}
|
|
|
|
function allow_trusted_hosts {
|
|
IP_VERSION=$1
|
|
case $IP_VERSION in
|
|
ipv6) VER_IPTABLES=${IP6TABLES};
|
|
IPVER="6" ;;
|
|
ipv4|*) VER_IPTABLES=${IPTABLES}
|
|
IPVER="4" ;;
|
|
esac
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} loading"
|
|
if [ -e "${FWCONFIGDIR}/ipv${IPVER}/trusted.conf" ]; then
|
|
for i in `grep -v "\#" "${FWCONFIGDIR}/ipv${IPVER}/trusted.conf"`; do
|
|
${VER_IPTABLES} -A ${InPreRules} -s $i -j ACCEPT
|
|
${VER_IPTABLES} -A ${OutPreRules} -d $i -j ACCEPT
|
|
done
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} done"
|
|
else
|
|
${display} RED "File Missing: ${FWCONFIGDIR}/ipv${IPVER}/trusted.conf"
|
|
${display} RED "Error: can not load trusted hosts file."
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} failed"
|
|
fi
|
|
}
|
|
function enable_mss_clamp {
|
|
IP_VERSION=$1
|
|
case $IP_VERSION in
|
|
ipv6) VER_IPTABLES=${IP6TABLES};
|
|
IPVER="6" ;;
|
|
ipv4|*) VER_IPTABLES=${IPTABLES}
|
|
IPVER="4" ;;
|
|
esac
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} loading"
|
|
if [ -e "${FWCONFIGDIR}/ipv${IPVER}/mss-clamp.conf" ]; then
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} read ${FWCONFIGDIR}/ipv${IPVER}/mss-clamp.conf successful"
|
|
while read -r interface mss type; do
|
|
[[ ${interface} = \#* ]] && continue
|
|
[[ ${interface} = "" ]] && continue
|
|
[[ ${mss} == "-" ]] && mss="1400:1536"
|
|
[[ ${type} == "-" ]] && type="${OutFilter}"
|
|
[[ ${type} == "out" ]] && type="${OutFilter}"
|
|
[[ ${type} == "fwd" ]] && type="${FwdFilter}"
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Read: ${interface} ${mss} ${type}"
|
|
${VER_IPTABLES} -A ${type} -p tcp --tcp-flags SYN,RST SYN -j TCPMSS \
|
|
--clamp-mss-to-pmtu -o ${interface} -m tcpmss --mss ${mss}
|
|
done < "${FWCONFIGDIR}/ipv${IPVER}/mss-clamp.conf"
|
|
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} done"
|
|
else
|
|
${display} RED "File Missing: ${FWCONFIGDIR}/ipv${IPVER}/mss-clamp.conf"
|
|
${display} RED "Error: can not load mss clamp file."
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} failed"
|
|
fi
|
|
}
|
|
|
|
function allow_resolvconf_servers {
|
|
IP_VERSION=$1
|
|
case $IP_VERSION in
|
|
ipv6) VER_IPTABLES=${IP6TABLES};
|
|
IPVER="6" ;;
|
|
ipv4|*) VER_IPTABLES=${IPTABLES}
|
|
IPVER="4" ;;
|
|
esac
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} loading"
|
|
[[ ${IP_VERSION} = "ipv4" ]] && ResolvConfFile="${ResolvConfv4File}"
|
|
[[ ${IP_VERSION} = "ipv6" ]] && ResolvConfFile="${ResolvConfv6File}"
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Using ${ResolvConfFile} as resolv.conf"
|
|
while read -r type server; do
|
|
[[ ${type} != "nameserver" ]] && continue
|
|
[[ ${type} = "" ]] && continue
|
|
# If we see a : in the server variable, we are most likely dealing with an ipv6 address
|
|
([[ ${server} =~ ":" ]] && [[ ${IP_VERSION} = "ipv4" ]]) && continue
|
|
([[ ! ${server} =~ ":" ]] && [[ ${IP_VERSION} = "ipv6" ]]) && continue
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Added ${server} to DNS client trusted list"
|
|
${VER_IPTABLES} -A ${OutPreRules} -p udp -s ${server} --sport 1024:65535 --dport 53 -j ACCEPT
|
|
${VER_IPTABLES} -A ${InPreRules} -p udp -d ${server} --dport 1024:65535 --sport 53 -j ACCEPT
|
|
${VER_IPTABLES} -A ${OutPreRules} -p tcp -s ${server} --sport 1024:65535 --dport 53 -j ACCEPT
|
|
${VER_IPTABLES} -A ${InPreRules} -p tcp -d ${server} --dport 1024:65535 --sport 53 -j ACCEPT
|
|
done < "${ResolvConfFile}"
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} done"
|
|
}
|
|
|
|
function allow_dnsclient_manual {
|
|
IP_VERSION=$1
|
|
case $IP_VERSION in
|
|
ipv6) VER_IPTABLES=${IP6TABLES};
|
|
IPVER="6" ;;
|
|
ipv4|*) VER_IPTABLES=${IPTABLES}
|
|
IPVER="4" ;;
|
|
esac
|
|
DNS_SERVERS="$2"
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} loading"
|
|
for i in ${DNS_SERVERS}; do
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Added ${i} to DNS client trusted list"
|
|
${VER_IPTABLES} -A ${OutPreRules} -p udp -s ${i} --sport 1024:65535 --dport 53 -j ACCEPT
|
|
${VER_IPTABLES} -A ${InPreRules} -p udp -d ${i} --dport 1024:65535 --sport 53 -j ACCEPT
|
|
${VER_IPTABLES} -A ${OutPreRules} -p tcp -s ${i} --sport 1024:65535 --dport 53 -j ACCEPT
|
|
${VER_IPTABLES} -A ${InPreRules} -p tcp -d ${i} --dport 1024:65535 --sport 53 -j ACCEPT
|
|
done
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} done"
|
|
}
|
|
|
|
function enable_easyblock {
|
|
IP_VERSION=$1
|
|
case $IP_VERSION in
|
|
ipv6) VER_IPTABLES=${IP6TABLES};
|
|
IPVER="6" ;;
|
|
ipv4|*) VER_IPTABLES=${IPTABLES}
|
|
IPVER="4" ;;
|
|
esac
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} loading"
|
|
if [ -e "${FWCONFIGDIR}/ipv${IPVER}/easyblock.conf" ]; then
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} read ${FWCONFIGDIR}/ipv${IPVER}/easyblock.conf successful"
|
|
while read -r direction interface address port protocol; do
|
|
[[ ${direction} = \#* ]] && continue
|
|
[[ ${direction} = "" ]] && continue
|
|
([[ ${direction} != "IN" ]] && [[ ${direction} != "OUT" ]]) \
|
|
&& ${display} RED "easyblock.conf: Error - must begin with IN/OUT: ${DEFAULT_COLOR}${direction} ${interface} ${address} ${port} ${protocol}" && continue
|
|
|
|
# Do some creative work with variables to make building the iptables rules fairly painless
|
|
[[ ${port} != "-" ]] && port="--dport ${port}"
|
|
([[ ${address} != "-" ]] && [[ ${direction} == "IN" ]]) && address="-s ${address}"
|
|
([[ ${address} != "-" ]] && [[ ${direction} == "OUT" ]]) && address="-d ${address}"
|
|
([[ ${interface} != "-" ]] && [[ ${direction} == "IN" ]]) && interface="-i ${interface}"
|
|
([[ ${interface} != "-" ]] && [[ ${direction} == "OUT" ]]) && interface="-o ${interface}"
|
|
[[ ${direction} == "OUT" ]] && chain="${OutEasyBlock}"
|
|
[[ ${direction} == "IN" ]] && chain="${InEasyBlock}"
|
|
[[ ${protocol} != "-" ]] && protocol="-p ${protocol}"
|
|
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Read: ${direction} ${interface} ${address} ${port} ${protocol}"
|
|
|
|
# Blank variables that we're not going to use.
|
|
[[ ${interface} == "-" ]] && interface=""
|
|
[[ ${port} == "-" ]] && port=""
|
|
[[ ${address} == "-" ]] && address=""
|
|
[[ ${protocol} == "-" ]] && protocol=""
|
|
|
|
${VER_IPTABLES} -A ${chain} ${interface} ${address} ${protocol} ${port} -j DROP
|
|
|
|
done < "${FWCONFIGDIR}/ipv${IPVER}/easyblock.conf"
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} done"
|
|
fi
|
|
}
|
|
|
|
function enable_filtering {
|
|
IP_VERSION=$1
|
|
case $IP_VERSION in
|
|
ipv6) VER_IPTABLES=${IP6TABLES};
|
|
IPVER="6" ;;
|
|
ipv4|*) VER_IPTABLES=${IPTABLES}
|
|
IPVER="4" ;;
|
|
esac
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} loading"
|
|
if [ -e "${FWCONFIGDIR}/ipv${IPVER}/acl.conf" ]; then
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} read ${FWCONFIGDIR}/ipv${IPVER}/acl.conf successful"
|
|
while read -r direction action interface srcaddress srcport dstaddress dstport protocol; do
|
|
[[ ${direction} = \#* ]] && continue
|
|
[[ ${direction} = "" ]] && continue
|
|
([[ ${direction} != "IN" ]] && [[ ${direction} != "OUT" ]]) \
|
|
&& ${display} RED "acl.conf: Error - must begin with IN/OUT: ${DEFAULT_COLOR}${direction} ${action} ${interface} ${srcaddress} ${srcport} ${dstaddress} ${dstport} ${protocol}" && continue
|
|
([[ ${action} != "ACCEPT" ]] && [[ ${action} != "DROP" ]]) \
|
|
&& ${display} RED "acl.conf: Error - action must be either ACCEPT or DROP : ${DEFAULT_COLOR}${direction} ${action} ${interface} ${srcaddress} ${srcport} ${dstaddress} ${dstport} ${protocol}" && continue
|
|
|
|
# Do some creative work with variables to make building the iptables rules fairly painless
|
|
[[ ${dstport} != "-" ]] && dstport="--dport ${dstport}"
|
|
[[ ${srcport} != "-" ]] && srcport="--sport ${srcport}"
|
|
[[ ${srcaddress} != "-" ]] && srcaddress="-s ${srcaddress}"
|
|
[[ ${dstaddress} != "-" ]] && dstaddress="-d ${dstaddress}"
|
|
([[ ${interface} != "-" ]] && [[ ${direction} == "IN" ]]) && interface="-i ${interface}"
|
|
([[ ${interface} != "-" ]] && [[ ${direction} == "OUT" ]]) && interface="-o ${interface}"
|
|
[[ ${direction} == "OUT" ]] && chain="${OutFilter}"
|
|
[[ ${direction} == "IN" ]] && chain="${InFilter}"
|
|
[[ ${protocol} != "-" ]] && protocol="-p ${protocol}"
|
|
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR}${direction} ${action} ${interface} ${srcaddress} ${srcport} ${dstaddress} ${dstport} ${protocol}"
|
|
|
|
# Blank variables that we're not going to use.
|
|
[[ ${interface} == "-" ]] && interface=""
|
|
[[ ${dstport} == "-" ]] && dstport=""
|
|
[[ ${srcport} == "-" ]] && srcport=""
|
|
[[ ${dstaddress} == "-" ]] && dstaddress=""
|
|
[[ ${srcaddress} == "-" ]] && srcaddress=""
|
|
[[ ${protocol} == "-" ]] && protocol=""
|
|
|
|
${VER_IPTABLES} -A ${chain} ${interface} ${protocol} ${srcaddress} ${srcport} ${dstaddress} ${dstport} -j ${action}
|
|
done < "${FWCONFIGDIR}/ipv${IPVER}/acl.conf"
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} done"
|
|
fi
|
|
}
|
|
|
|
function enable_forwarding {
|
|
IP_VERSION=$1
|
|
case $IP_VERSION in
|
|
ipv6) VER_IPTABLES=${IP6TABLES};
|
|
IPVER="6" ;;
|
|
ipv4|*) VER_IPTABLES=${IPTABLES}
|
|
IPVER="4" ;;
|
|
esac
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} loading"
|
|
if [ -e "${FWCONFIGDIR}/ipv${IPVER}/forward.conf" ]; then
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} read ${FWCONFIGDIR}/ipv${IPVER}/forward.conf successful"
|
|
while read -r action srcinterface srcaddress dstinterface dstaddress bidirectional; do
|
|
[[ ${action} = \#* ]] && continue
|
|
[[ ${action} = "" ]] && continue
|
|
([[ ${action} != "ACCEPT" ]] && [[ ${action} != "DROP" ]]) \
|
|
&& ${display} RED "acl.conf: Error - action must be either ACCEPT or DROP : ${DEFAULT_COLOR}${action} ${srcinterface} ${srcaddress} ${dstinterface} ${srcaddress}" && continue
|
|
|
|
# Do some creative work with variables to make building the iptables rules fairly painless
|
|
([[ ${bidirectional} == "yes" ]] && [[ ${srcaddress} != "-" ]]) && revsrcaddress="-d ${srcaddress}"
|
|
([[ ${bidirectional} == "yes" ]] && [[ ${dstaddress} != "-" ]]) && revdstaddress="-s ${dstaddress}"
|
|
([[ ${bidirectional} == "yes" ]] && [[ ${dstinterface} != "-" ]]) && revdstinterface="-i ${dstinterface}"
|
|
([[ ${bidirectional} == "yes" ]] && [[ ${srcinterface} != "-" ]]) && revsrcinterface="-o ${srcinterface}"
|
|
[[ ${srcaddress} != "-" ]] && srcaddress="-s ${srcaddress}"
|
|
[[ ${dstaddress} != "-" ]] && dstaddress="-d ${dstaddress}"
|
|
[[ ${srcinterface} != "-" ]] && srcinterface="-i ${srcinterface}"
|
|
[[ ${dstinterface} != "-" ]] && dstinterface="-o ${dstinterface}"
|
|
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR}${action} ${srcinterface} ${srcaddress} ${dstinterface} ${srcaddress}"
|
|
|
|
# Blank variables that we're not going to use.
|
|
[[ ${srcinterface} == "-" ]] && srcinterface=""
|
|
[[ ${dstinterface} == "-" ]] && dstinterface=""
|
|
[[ ${dstaddress} == "-" ]] && dstaddress=""
|
|
[[ ${srcaddress} == "-" ]] && srcaddress=""
|
|
[[ ${bidirectional} == "-" ]] && bidirectional="no"
|
|
|
|
${VER_IPTABLES} -A ${FwdFilter} ${srcinterface} ${srcaddress} ${dstinterface} ${dstaddress} -j ${action}
|
|
[[ ${bidirectional} == "yes" ]] && ${VER_IPTABLES} -A ${FwdFilter} ${revsrcinterface} ${revsrcaddress} ${revdstinterface} ${revdstaddress} -j ${action}
|
|
done < "${FWCONFIGDIR}/ipv${IPVER}/forward.conf"
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} done"
|
|
fi
|
|
}
|
|
|
|
function enable_nat {
|
|
IP_VERSION=$1
|
|
case $IP_VERSION in
|
|
ipv6) VER_IPTABLES=${IP6TABLES};
|
|
IPVER="6" ;;
|
|
ipv4|*) VER_IPTABLES=${IPTABLES}
|
|
IPVER="4" ;;
|
|
esac
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} loading"
|
|
if [ -e "${FWCONFIGDIR}/ipv${IPVER}/nat.conf" ]; then
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} read ${FWCONFIGDIR}/ipv${IPVER}/nat.conf successful"
|
|
while read -r type srcinterface srcaddress dstinterface dstaddress; do
|
|
[[ ${type} = \#* ]] && continue
|
|
[[ ${type} = "" ]] && continue
|
|
([[ ${type} != "SNAT" ]] && [[ ${type} != "MASQ" ]] && [[ ${type} != "NETMAP" ]]) \
|
|
&& ${display} RED "nat.conf: Error - must begin with SNAT/MASQ/NETMAP: ${DEFAULT_COLOR}${type} ${srcinterface} ${srcaddress} ${dstinterface} ${dstaddress}" && continue
|
|
|
|
# Do some creative work with variables to make building the iptables rules fairly painless
|
|
[[ ${srcinterface} != "-" ]] && srcinterface="-i ${srcinterface}"
|
|
[[ ${dstinterface} != "-" ]] && dstinterface="-o ${dstinterface}"
|
|
([[ ${srcaddress} != "-" ]] && [[ ${type} != "NETMAP" ]]) && srcaddress="-s ${srcaddress}"
|
|
|
|
([[ ${dstinterface} != "-" ]] && [[ ${type} == "MASQ" ]]) && action="-j MASQUERADE"
|
|
([[ ${dstinterface} == "-" ]] && [[ ${type} == "MASQ" ]]) && \
|
|
${display} RED "nat.conf: Error - MASQ rule can not have empty destination interface: ${DEFAULT_COLOR}${type} ${srcinterface} ${srcaddress} ${dstinterface} ${dstaddress}" \
|
|
&& continue
|
|
|
|
([[ ${dstaddress} != "-" ]] && [[ ${type} == "SNAT" ]]) && action="-j SNAT" && dstaddress="--to-source ${dstaddress}"
|
|
([[ ${dstaddress} == "-" ]] && [[ ${type} == "SNAT" ]]) && \
|
|
${display} RED "nat.conf: Error - SNAT rule can not have empty destination address: ${DEFAULT_COLOR}${type} ${srcinterface} ${srcaddress} ${dstinterface} ${dstaddress}" \
|
|
&& continue
|
|
|
|
([[ ${srcaddress} != "-" ]] && [[ ${dstaddress} != "-" ]] && [[ ${type} == "NETMAP" ]]) && action="-j NETMAP" && srcaddress="-d ${srcaddress}" && dstaddress="--to ${dstaddress}"
|
|
|
|
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR}${direction} ${action} ${interface} ${srcaddress} ${srcport} ${dstaddress} ${dstport} ${protocol}"
|
|
|
|
# Blank variables that we're not going to use.
|
|
[[ ${srcinterface} == "-" ]] && srcinterface=""
|
|
[[ ${dstinterface} == "-" ]] && dstinterface=""
|
|
[[ ${dstaddress} == "-" ]] && dstaddress=""
|
|
[[ ${srcaddress} == "-" ]] && srcaddress=""
|
|
|
|
${VER_IPTABLES} -A ${NAT} -t nat ${srcaddress} ${action} ${dstinterface} ${dstaddress}
|
|
${VER_IPTABLES} -A ${FwdFilter} ${M_STATE} ${C_STATE} RELATED,ESTABLISHED ${srcinterface} ${srcaddress} ${dstinterface} -j ACCEPT
|
|
done < "${FWCONFIGDIR}/ipv${IPVER}/nat.conf"
|
|
${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} done"
|
|
fi
|
|
} |