# IPv4 Specific Configuration File
#

# Allow everything over loopback (lo/127.0.0.0/8)
# Good idea to keep this turned on, but if you so wish to,
# you can disable it here.
# Values: no | yes (default)
AllowAllv4Loopback="yes"

# Very early on rules to allow for trusted machines to access
# this machine.  Rather important and helps keep you from getting
# locked out should the firewalling rules go bad.
#
# IMPORTANT:  Hosts put in the trusted file will have complete
# and unfettered access to the host, ignoring all other rules.
#
# Config file: ipv4/trusted.conf
# Values: no | yes (default)
EnableTrustedv4Hosts="yes"

# Enable MSS clamping to work around MTU size issues
# on network links such as PPPoE and wireless
# Config file: ipv4/mss-clamp.conf
# Values: no | yes (default)
Enablev4MSSClamp="yes"

# Enable connection tracking features of netfilter/iptables
# conntracking allows the firewall to be smart about what
# packets it allows and refuses.  On highly loaded systems or
# ones with low memory, this may be desirable.  Everyone else
# should probably leave this on.
# Depended on by: Enablev4NAT Enablev4ConnTrackInterfaces
# Values: no | yes (default)
Enablev4ConnectionTracking="yes"

# Interfaces to enable connection tracking by default
# List of interfaces to enable ESTABLISHED, RELATED, and INVALID on
# by default.  Normally, this is helpful and a good idea.  Some
# people with specific requirements may want to disable and do manually
# in the custom rules.
# Values: none | all (default)| interface name
Enablev4ConnTrackInterfaces="all"

# Use /etc/resolv.conf as source for DNS servers that we communicate
# with as a client.  If you turn this off (recommended if on static IP),
# then you will need to manually define the DNS servers you use.
# Without conntrack rules allowing established/related, DNS traffic may
# be blocked and cause issues.
# Values: no | yes (default)
DNSClientUsev4ResolvConf="yes"
ResolvConfv4File="/etc/resolv.conf"

# Uncomment below if you set above to no.  You can still manually define your servers
# here if you want.  Useful at times.
# Values: space separated IP list of DNS servers
#DNSClientManualv4Servers=""

# Enable the Services access list
# This allows you to define services on the local
# machine that you want to be accessible to the world.
# Config file: ipv4/services.conf
# Values: no | yes (default)
Enablev4Services="yes"

# Enable the EasyBlock access list
# This is a simple/easy way to block traffic in or out,
# no complex options.  Use the Filter options for more
# complex ACLs
# Config file: ipv4/easyblock.conf
# Values: no | yes (default)
Enablev4EasyBlock="yes"

# Enable IPv4 filtering rules
# This allows you to define complex access control list /
# filtering rules.
# Config file: ipv4/acl.conf
# Values: no | yes (default)
Enablev4Filtering="yes"

# Enable IPv4 forwarding rules
# This allows you to define forwarding rules
# Config file: ipv4/forward.conf
# Values: No | yes (default)
Enablev4Forwarding="yes"

# Enable IPv4 NAT/NETMAP rules
# This allows you to set up NAT rules, SNAT, MASQ, and NETMAP
# Config file: ipv4/nat.conf
# Requires: Enablev4ConnectionTracking="yes"
# Values: no | yes (default)
Enablev4NAT="yes"

# Enable IPv4 Port Forwarding rules
# This allows you to set up port forwarding rules to allow
# external access to internal machines
# Config file: ipv4/portfw.conf
# Values: no | yes (default)
Enablev4PortForwarding="yes"