diff --git a/etc/ipv4.conf b/etc/ipv4.conf
index 76559eb..e3c9733 100644
--- a/etc/ipv4.conf
+++ b/etc/ipv4.conf
@@ -47,6 +47,13 @@ ResolvConfv4File="/etc/resolv.conf"
 # Values: space separated IP list of DNS servers
 #DNSClientManualv4Servers=""
 
+# Enable the Services access list
+# This allows you to define services on the local
+# machine that you want to be accessible to the world.
+# Config file: ipv4/services.conf
+# Values: no | yes (default)
+Enablev4Services="yes"
+
 # Enable the EasyBlock access list
 # This is a simple/easy way to block traffic in or out,
 # no complex options.  Use the Filter options for more
diff --git a/etc/ipv4/service.conf b/etc/ipv4/service.conf
new file mode 100644
index 0000000..28398fd
--- /dev/null
+++ b/etc/ipv4/service.conf
@@ -0,0 +1,18 @@
+# Allowed Service Rules
+# Use this file to set up which services you wish for the world to have
+# access to on your machine.
+# Use tabs or single space to separate
+#
+# <service> <protocol> <interface> <address> <srcaddress>
+#
+# Service: Required ( single or list of comma separated ports/services )
+# Protocol: Required ( tcp or udp )
+# Interface: Optional ( interface of incoming connection )
+# Address: Optional ( address of incoming connection )
+# Source Address: Optional ( address to allow connections from )
+# You can use '-' for optional fields
+#============================================================
+#<service> <protocol> <interface> <address> <srcaddress>
+#http tcp eth0 192.168.1.1 192.168.1.0/24
+ssh,http,https tcp - - -
+
diff --git a/etc/ipv6.conf b/etc/ipv6.conf
index a9789ec..3ced607 100644
--- a/etc/ipv6.conf
+++ b/etc/ipv6.conf
@@ -47,6 +47,13 @@ ResolvConfv6File="/etc/resolv.conf"
 # Values: space separated IP list of DNS servers
 #DNSClientManualv6Servers=""
 
+# Enable the Services access list
+# This allows you to define services on the local
+# machine that you want to be accessible to the world.
+# Config file: ipv6/services.conf
+# Values: no | yes (default)
+Enablev6Services="yes"
+
 # Enable the EasyBlock access list
 # This is a simple/easy way to block traffic in or out,
 # no complex options.  Use the Filter options for more
diff --git a/etc/ipv6/service.conf b/etc/ipv6/service.conf
new file mode 100644
index 0000000..03af8e2
--- /dev/null
+++ b/etc/ipv6/service.conf
@@ -0,0 +1,18 @@
+# Allowed Service Rules
+# Use this file to set up which services you wish for the world to have
+# access to on your machine.
+# Use tabs or single space to separate
+#
+# <service> <protocol> <interface> <address> <srcaddress>
+#
+# Service: Required ( single or list of comma separated ports/services )
+# Protocol: Required ( tcp or udp )
+# Interface: Optional ( interface of incoming connection )
+# Address: Optional ( address of incoming connection )
+# Source Address: Optional ( address to allow connections from )
+# You can use '-' for optional fields
+#============================================================
+#<service> <protocol> <interface> <address> <srcaddress>
+#http tcp eth0 fc00::1 fc00::/64
+ssh,http,https tcp - - -
+
diff --git a/lib/iptables.inc b/lib/iptables.inc
index 3918404..efaa38b 100644
--- a/lib/iptables.inc
+++ b/lib/iptables.inc
@@ -309,8 +309,8 @@ function enable_filtering {
 			[[ ${direction} = "" ]] && continue
 			([[ ${direction} != "IN" ]] && [[ ${direction} != "OUT" ]]) \
 					&& ${display} RED "acl.conf: Error - must begin with IN/OUT: ${DEFAULT_COLOR}${direction} ${action} ${interface} ${srcaddress} ${srcport} ${dstaddress} ${dstport} ${protocol}" && continue
-			([[ ${action} != "ACCEPT" ]] && [[ ${action} != "DROP" ]]) \
-					&& ${display} RED "acl.conf: Error - action must be either ACCEPT or DROP : ${DEFAULT_COLOR}${direction} ${action} ${interface} ${srcaddress} ${srcport} ${dstaddress} ${dstport} ${protocol}" && continue
+			([[ ${action} != "ACCEPT" ]] && [[ ${action} != "DROP" ]] && [[ ${action} != "REJECT" ]]) \
+					&& ${display} RED "acl.conf: Error - action must be either ACCEPT, DROP, or REJECT : ${DEFAULT_COLOR}${direction} ${action} ${interface} ${srcaddress} ${srcport} ${dstaddress} ${dstport} ${protocol}" && continue
 
 			# Do some creative work with variables to make building the iptables rules fairly painless
 			[[ ${dstport} != "-" ]] && dstport="--dport ${dstport}"
@@ -322,6 +322,7 @@ function enable_filtering {
 			[[ ${direction} == "OUT" ]] && chain="${OutFilter}"
 			[[ ${direction} == "IN" ]] && chain="${InFilter}"
 			[[ ${protocol} != "-" ]] && protocol="-p ${protocol}"
+			[[ ${action} == "REJECT" ]] && action="REJECT --reject-with tcp-reset"
 			
 			${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR}${direction} ${action} ${interface} ${srcaddress} ${srcport} ${dstaddress} ${dstport} ${protocol}"
 			
@@ -450,27 +451,31 @@ function enable_services {
 		use_conntrack="no"
 		([[ ${IP_VERSION} == "ipv4" ]] && [[ ${Enablev4ConnectionTracking} == "yes" ]]) && conntrack_state="${M_STATE} ${C_STATE} NEW"
 		([[ ${IP_VERSION} == "ipv6" ]] && [[ ${Enablev6ConnectionTracking} == "yes" ]]) && conntrack_state="${M_STATE} ${C_STATE} NEW"
-		while read -r service protocol interface srcaddress; do
+		while read -r service protocol interface address srcaddress; do
+			multiport="no"
 			[[ ${service} = \#* ]] && continue
 			[[ ${service} = "" ]] && continue
 			[[ ${service} == "-" ]] \
-					&& ${display} RED "service.conf: Error - must begin with service name or port number: ${DEFAULT_COLOR}${service} ${protocol} ${interface} ${srcaddress}" && continue
+					&& ${display} RED "service.conf: Error - must begin with service name or port number: ${DEFAULT_COLOR}${service} ${protocol} ${interface} ${address} ${srcaddress}" && continue
 			[[ ${protocol} == "-" ]] \
-					&& ${display} RED "service.conf: Error - protocol can not be empty: ${DEFAULT_COLOR}${service} ${protocol} ${interface} ${srcaddress}" && continue
-
+					&& ${display} RED "service.conf: Error - protocol can not be empty: ${DEFAULT_COLOR}${service} ${protocol} ${interface} ${address} ${srcaddress}" && continue
+			[[ ${service} =~ "," ]] && multiport="yes"
 			# Do some creative work with variables to make building the iptables rules fairly painless
-			[[ ${service} != "-" ]] && service="--dport ${service}"
+			([[ ${service} != "-" ]] && [[ ${multiport} != "yes" ]]) && service="--dport ${service}"
+			([[ ${service != "-" ]] && [[ ${multiport} == "yes" ]]) && service="-m multiport --dports ${service}"
 			[[ ${protocol} != "-" ]] && protocol="-p ${protocol}"
 			[[ ${interface} != "-" ]] && interface="-i ${interface}"
+			[[ ${address} != "-" ]] && srcaddress="-d ${address}"
 			[[ ${srcaddress} != "-" ]] && srcaddress="-s ${srcaddress}"
 			
-			${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Read: ${service} ${protocol} ${interface} ${srcaddress}"
+			${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} Read: ${service} ${protocol} ${interface} ${address} ${srcaddress}"
 			
 			# Blank variables that we're not going to use.
 			[[ ${interface} == "-" ]] && interface=""
+			[[ ${address} == "-" ]] && address=""
 			[[ ${srcaddress} == "-" ]] && srcaddress=""
 			
-			${VER_IPTABLES} -A ${InFilter} ${interface} ${address} ${protocol} ${port} ${conntrack_state} -j ACCEPT
+			${VER_IPTABLES} -A ${InFilter} ${service} ${protocol} ${interface} ${address} ${srcaddress} ${conntrack_state} -j ACCEPT
 			
 		done < "${FWCONFIGDIR}/ipv${IPVER}/services.conf"
 		${debug} ${DebugColor} "${FUNCNAME}:${DEFAULT_COLOR} done"